Mac's lovely ladies and some dudes too

Baja.Beaches

Super Active Member
I do plan on the Blumats for sure, but that will have to be outdoors after season, too much going on right now. I really like what @SCJedi did with his outdoor & a 50 gallon barrel with filter. I hope to follow his lead. I plan to set that up this winter.

Are you running the Blumats in the greenhouse too?

I seldom flower indoors except in winter, my dinky tent is off in summer. When the indoor is going I can never leave, nobody trustworthy to take care of it, I have learned my lesson there so still mainly going old school backyard here.
 

macsnax

PICK YOUR OWN
I do plan on the Blumats for sure, but that will have to be outdoors after season, too much going on right now. I really like what @SCJedi did with his outdoor & a 50 gallon barrel with filter. I hope to follow his lead. I plan to set that up this winter.

Are you running the Blumats in the greenhouse too?

I seldom flower indoors except in winter, my dinky tent is off in summer. When the indoor is going I can never leave, nobody trustworthy to take care of it, I have learned my lesson there so still mainly going old school backyard here.
I didn't run my greenhouse this summer, I wish I was able to but it didn't work out. I know what you mean about being able to rely on someone, not many people can do a good job of it. I asked my wife to unplug a res pump last week when I couldn't... She unplugged a cloner and I ended up losing a few. Whatcha gonna do 🤷‍♂️
 

macsnax

PICK YOUR OWN
Lol two pukes and a shit, sounds about right. I was just checking out the pearly whites on these plants, here's some blumat root porn to make up for that. I can't remember what site, but I was taking to someone recently about trichoderma and how I get it in coco.

20190920_212225.jpg
20190920_212231.jpg
 

spyralout

🌱🌿🌲🔥💨
Lol two pukes and a shit, sounds about right. I was just checking out the pearly whites on these plants, here's some blumat root porn to make up for that. I can't remember what site, but I was taking to someone recently about trichoderma and how I get it in coco.

View attachment 22715
View attachment 22714
"Two Pukes and a Shit" - story and narration by I.A.Taqobel 😂😂😂😆😄
Nice shots man. I like the less documented part of the plant and grow itself as much as the typical bud shots.
It mighta been me that you talked to. During one of my rapid rooter questions I saw some white fuzz at the stem in the hole.
 

macsnax

PICK YOUR OWN
"Two Pukes and a Shit" - story and narration by I.A.Taqobel 😂😂😂😆😄
Nice shots man. I like the less documented part of the plant and grow itself as much as the typical bud shots.
It mighta been me that you talked to. During one of my rapid rooter questions I saw some white fuzz at the stem in the hole.
That's pretty funny, yo quero Taqobel 😂🤣. And you're right it was you, I remember your pics now. I really dig all the micro life I have going on in coco.... wait that's not supposed to happen with salts, lol.
 
Last edited:

macsnax

PICK YOUR OWN
Ok sorry the for lack of updates, been busy as hell. Not enough hours in the day. Here's a handful of DDB pics. They're coming along nicely, every pheno has plenty of frost and the nose on them are really nice. You always have that question mark on how a cross is going to turn out, but I can say these definitely exceeded my expectations. I'll be chopping a couple in a few weeks with a smoke report to follow.

Oh and the f2's in that cookie leaner are done too, is just a small batch. But I'm sure they'll be pretty nice too.

IMG_20191005_080252891.jpgIMG_20191005_080305524.jpgIMG_20191005_080322766.jpgIMG_20191005_080333096.jpgIMG_20191005_080341664.jpgIMG_20191005_080350867.jpg
 

spyralout

🌱🌿🌲🔥💨
Ok sorry the for lack of updates, been busy as hell. Not enough hours in the day. Here's a handful of DDB pics. They're coming along nicely, every pheno has plenty of frost and the nose on them are really nice. You always have that question mark on how a cross is going to turn out, but I can say these definitely exceeded my expectations. I'll be chopping a couple in a few weeks with a smoke report to follow.

Oh and the f2's in that cookie leaner are done too, is just a small batch. But I'm sure they'll be pretty nice too.

View attachment 24575View attachment 24577View attachment 24582View attachment 24583View attachment 24584View attachment 24585
Niccccce ssssnnake bud shot (y)
 

Capt C

Saltwater Cowboy
Ok sorry the for lack of updates, been busy as hell. Not enough hours in the day. Here's a handful of DDB pics. They're coming along nicely, every pheno has plenty of frost and the nose on them are really nice. You always have that question mark on how a cross is going to turn out, but I can say these definitely exceeded my expectations. I'll be chopping a couple in a few weeks with a smoke report to follow.

Oh and the f2's in that cookie leaner are done too, is just a small batch. But I'm sure they'll be pretty nice too.

View attachment 24575View attachment 24577View attachment 24582View attachment 24583View attachment 24584View attachment 24585
Hey Mac, is everything going okay with the Bluemats ? Hooking mine up on Tuesday . Mac after you adjust to get the drip to hang the directions say to tighten 1 - 2 arrows past that point. Are you tightening yours 1 or 2 arrows? I found a white oil base fine point sharpie to mark those arrows so these old eyeballs can see them.LOL I will post a picture of the set up this week once i get it installed. I have a small amount of perlite in my mix as well i hope it does not give me any trouble.
 

macsnax

PICK YOUR OWN
Hey Mac, is everything going okay with the Bluemats ? Hooking mine up on Tuesday . Mac after you adjust to get the drip to hang the directions say to tighten 1 - 2 arrows past that point. Are you tightening yours 1 or 2 arrows? I found a white oil base fine point sharpie to mark those arrows so these old eyeballs can see them.LOL I will post a picture of the set up this week once i get it installed. I have a small amount of perlite in my mix as well i hope it does not give me any trouble.
Yeah they're running well other than I think the perlite is starting to screw with me here in late flower with a large root mass. These one gals get pretty filled out by chop, def gonna give those floraflex coco blocks a go next. When I adjust the carrot it's usually 1-2 arrows. I don't have a set way, I just go by feel on what I think out should be, lol. Gonna set up the bm's on all mothers here soon. Then I might look into the floraflex stuff for my runs. I think blumats would be pretty much maintenance free with a water only diet.

Edit.... I get your question now. I turn it to where the drip hangs, and then 1/4-1 arrow depending on how things are flowing. On the first go I would err on the side of caution.
 
Last edited:

Capt C

Saltwater Cowboy
Yeah they're running well other than I think the perlite is starting to screw with me here in late flower with a large root mass. These one gals get pretty filled out by chop, def gonna give those floraflex coco blocks a go next. When I adjust the carrot it's usually 1-2 arrows. I don't have a set way, I just go by feel on what I think out should be, lol. Gonna set up the bm's on all mothers here soon. Then I might look into the floraflex stuff for my runs. I think blumats would be pretty much maintenance free with a water only diet.

Edit.... I get your question now. I turn it to where the drip hangs, and then 1/4-1 arrow depending on how things are flowing. On the first go I would err on the side of caution.
I am just going in to it with the mind set that i need to flush the lines or i should say just opening the carrots and resetting them once every week or two hopefully. If the Z7 does its job should not be any issues i would think.
 

macsnax

PICK YOUR OWN
I am just going in to it with the mind set that i need to flush the lines or i should say just opening the carrots and resetting them once every week or two hopefully. If the Z7 does its job should not be any issues i would think.
A little effort and the z7 will have you running pretty good capt. Those enzymes do some pretty serious work. Try a run with and without to see how dramatic the difference is, at least with the MC it was a wide margin of particle content.
 
Top