spyralout
🌱🌿🌲🔥💨
I got a shit ton of em new in retail pkg. FOAF's work was getting rid of them. Screw in spiral bulb kind. I could send you some
Schwaggy P's Random Stuff
- Thread starter Schwaggy P
- Start date
spyralout
🌱🌿🌲🔥💨
Structure structure structure!!! Beautiful
Main Cola
Chuckers Paradise
I think he’s talking about Black Lights the strain not the bulb lol
crimsonecho
Self-Proclaimed Don Quixote
Hahhaha shit i got that just now!
yougrowyourway
illgrowmyway
crimsonecho
Self-Proclaimed Don Quixote
No doubt bro. I’m kinda old school when it comes to cannabis and NL is one of my favorites. So if it has NL in it i’m gonna smoke it hahahha.Y'all are funny shit. Lol.
Yeah he meant the strain. Lmfao. Those black lights are gonna be some special stuff. Some very special beanos they will be. Yay for awesomeness!!!
Watching the play by play of the creation of them is so dang neat.
Heathenraider
Heathen Basterd
They are like goats , let em in the door half the weed and all the booze gone
Freshly flipped table of ladies that will be getting fully pollinated by the Skunky D (Chem D x Skunky Brewster). The ladies include: Chem D, Skunky Brewster #7, Skunky Brewster #8, Chem'91(skva), Chem'91(JB), and HAOG.
The focus of this pollination is really to get a Chem D BX1 and two versions of Skunky Brewster BX1 to reinforce the frost factor using the preferred female selections from the Skunky Brewster F1. Like the HAOG cube project, I'll probably end up cubing the Chem D as well (just not a polyBX).
I figure the Chem mashups would be interesting to hunt through and I had extra on the veg table so they were thrown in.
I generally get better seed yields from hydro runs vs. soil runs, so I'm doing a full tent pollination of hydro for this round.
Skunky D male (Chem D x Skunky Brewster)
Chem D
Skunky Brewster #7 (RKS#5 x Iraqi)
Skunky Brewster #8 (RKS#5 x Iraqi)
The focus of this pollination is really to get a Chem D BX1 and two versions of Skunky Brewster BX1 to reinforce the frost factor using the preferred female selections from the Skunky Brewster F1. Like the HAOG cube project, I'll probably end up cubing the Chem D as well (just not a polyBX).
I figure the Chem mashups would be interesting to hunt through and I had extra on the veg table so they were thrown in.
I generally get better seed yields from hydro runs vs. soil runs, so I'm doing a full tent pollination of hydro for this round.
Skunky D male (Chem D x Skunky Brewster)
Chem D
Skunky Brewster #7 (RKS#5 x Iraqi)
Hydro
PICK YOUR OWN
Oh snap....Schwaggy getting his flood on. What RKS is that in the Skunky Brewster?
Hydro
PICK YOUR OWN
Ya, my fault the way I worded it. I meant whos RKS is that in the Skunky Brewster.
Oh snap indeedThe Skunky Brewster was bred by Strayfox. The lineage on the pack read (RKS 5 x Iraqi), and when Strayfox posted on IG about the Skunky Brewster, he mentioned the lineage as (Sterling Green x Iraqi). Bodhiguide recently posted a Hippy Slayer pic with (Dirty Hippy x Sterling Green) and is just as coated as the Skunky B's. I remember Hippy Slayer being (Dirty Hippy x RKS), so maybe it's a selection from Bodhi's RKS line that has been renamed Sterling Green. I can't say for sure as this is as far as I've gotten in researching the Skunk used.
Hydro
PICK YOUR OWN
Nice job with her. She looks great man.
The Skunky Brewster was bred by Strayfox. The lineage on the pack read (RKS 5 x Iraqi), and when Strayfox posted on IG about the Skunky Brewster, he mentioned the lineage as (Sterling Green x Iraqi). Bodhiguide recently posted a Hippy Slayer pic with (Dirty Hippy x Sterling Green) and is just as coated as the Skunky B's. I remember Hippy Slayer being (Dirty Hippy x RKS), so maybe it's a selection from Bodhi's RKS line that has been renamed Sterling Green. I can't say for sure as this is as far as I've gotten in researching the Skunk used.
Cob_nUt
"Justa Ganja Lover"
About to make a batch of this & CS.Materials:
Silver Nitrate (AgNO3)
Sodium Thiosulfate or Sodium Thiosulfate Pentahydrate (Na2S2O3 or Na2S2O3-5H2O)
Distilled water
Gloves
Mask
Containers
Spray bottle
Volume measuring device
Scale
We will be preparing 2 separate solutions that will be mixed later for spraying.
Labeling your containers with A and B before will help to keep them from being confused.
SOLUTION A – Silver Nitrate
1) Mass 1.7g of Silver Nitrate, and add this to your container labeled A (pic 1,2)
2) Add 100mL of distilled water to container A (pic 3).
3) Agitate the mixture until the Silver Nitrate dissolves.
4) Store Solution A in a dark bottle or in a bag, and keep it in a dark place until needed for mixing STS spray solution (pic 4).
SOLUTION B – Sodium Thiosulfate
‼TAKE NOTE OF WHICH SODIUM THIOSULFATE COMPOUND YOU HAVE: EITHER SODIUM THIOSULFATE OR SODIUM THIOSULFATE PENTAHYDRATE! The only difference between the two is that one has water in the compound that can throw off the concentrations of our target solution if no tweak to the mass is made.
5) Mass either: 6.32g Sodium Thiosulfate OR 9.92g Sodium Thiosulfate Pentahydrate and add this to your container labeled B (pic 5,6).
6) Add 400mL of distilled water to container B (pic 7).
7) Agitate the mixture until the Sodium Thiosulfate dissolves.
Preparation of STS
We will be mixing an amount of Solution A and Solution B to create the Silver Thiosulfate. It is very important to note:
‼WE MUST ADD SOLUTION-A TO SOLUTION-B WHEN MIXING.
To create a stock solution of STS, we will need a ratio of [1partA : 4partsB]. You can tailor your volume to make only what you will need for your spraying application.
For the purposes of this example, I will prepare a stock solution of specific volume:
8) Add 5mL of Solution A to 20mL of Solution B. You now have a stock solution of Silver Thiosulfate (STS) (pic 9).
Dilution of STS for Spray Application
Depending on the particular plant you would like to reverse, you may need stronger/weaker STS spray. You can use 1:2, 1:3, 1:4, etc. ratios of STS:Water.
I will be using a 1:2 ratio and make any adjustments based on how the plant is responding.
9) Since we have 25mL of STS prepared, we can add 50mL of distilled water (pic 10). We now have 1:2 STS reversal spray solution. Add this mixture to your spray bottle if you mixed in a different container (pic 11).
Application of STS
10) Place a drop cloth, cardboard, or cover under the female to keep overspray contained. This also has the effect of shielding the soil from STS overspray (pic 12).
11) Spray the female liberally, either as with any foliar spray application or targeting only nodes. I have chosen to spray the entire plant (pic 13,14).
12) Allow the female to dry before returning her to the growing space.
You will repeat the STS spray application every 7-10 days until you observe the development of male parts. This means there will only need to be 2-3 applications of the STS spray for successful reversal and collection of pollen.
Here is the Chemdog’91(skva) progressing through the reversal process, culminating in harvestable pollen around day 29.
REVERSED POLLEN COLLECTION
There are many ways to go about harvest and collection of fem pollen, but this is how I go about the process.
Materials:
Reversed pollen sacs
Grinder screen and lid (no kief catch)
Scraper (cut from plant tag)
Pollen container
Razor
Work Surface (black paper plate)
1) You can better prep your pollen by separating the “bananas” from any other plant matter, but I left them on in this picture (pic 1).
2) Place the bananas in the grinder screen (no kief catch attached to bottom), and gently agitate/chop with the scraper (pic 2).
3) Holding the screen with one hand, gently tap the side with the grinder lid. You will see the bananas skid across the screen (pic 3).
4) Give the screen a minute before gently lifting to reveal the separated pollen (pic 4).
5) Scrape the pollen with your razor and store into your pollen container.
With your fem pollen created and collected, you can now pollinate your females to create feminized seeds. Feel free to marry this with the single branch pollination process to create small batch fem seeds for yourself without sacrificing whole plants.
Schwaggy what does you use for containers of the stock solution of thr A & B?
I use the Erlenmeyer flasks in the pictures with plastic wrap to cover them. You can use an empty hydrogen peroxide bottle for solution A to keep light from degrading it.