It’s an old Winco from the 70s or 80s with a Briggs & Stratton. Getting it to run should be stupid simple but I’ve never seen this carburetor setup before so I’m afraid to adjust anything too far. I can’t find an oil shutoff switch anywhere on it so it’s probably old enough to where one wasn’t installed. I timed it today and the longest it would run was 3.5 minutes and then it would shut down. Oil is full, gas is clean, I replaced the fuel filter and cleaned the lines and fuel valve out, I’d it looks like it’s getting flinty of gas through that filter while it’s running. Thankfully a neighbor let me grab his generator at around noon and is letting me use it until 8pm so I can get the house heated up, the fridge/freezer cooled back down, and a shower. They are saying we might have power back tonight so I’m crossing my fingers.