NoWaistedSpace
PICK YOUR OWN
With the bars, I can keep adding on to them. lol
THE BROADER SPECTRUM 380-760nm Samsung Strips
- Thread starter NoWaistedSpace
- Start date
With the bars, I can keep adding on to them. lol
TerpyTyrone
LED Recruiter
Lets just say. Its the wave of the future. Theres no denying it.
Either hop on the LED vessel or we'll see ya later.
This ships sailing!!
Either hop on the LED vessel or we'll see ya later.
This ships sailing!!
ChiefRunningPhist
Drunk on Knowledge
Cool strips 
Cool builds
Cool builds
TerpyTyrone
LED Recruiter
Where U been bro!?!!?Cool strips
Cool builds
ChiefRunningPhist
Drunk on Knowledge
Opie1
Master Grower
One of the kits I got from him is a 6-strip/sunboard fixture with a 185H MeanWell driver, pushes a little over 200watts. It’s perfect for veg in a 2x4 in 6500k.
I’d like to build one with 6-8 strips/sunboards in 3500k with a 240H driver, it’d be awesome for flowering in a 2x4. I really like these more than the qb’s because the light is spread out more, the qb’s are great for sure, these are just a little better, IMO.
That’s on the lowest setting, it’ll blind you on full throttle.
Cornfield Cultivator
Nutcase
Here’s a 14 strip with a 600 driver
TerpyTyrone
LED Recruiter
Can U show ur wiring?
I have a site I can get 34" heatsunks and make the light 2 strips wide.
I'm sure I could figure out the wiring.
Hlg 600 driver?
Very nice!!
Cornfield Cultivator
Nutcase
It’s easy positive to positive negative to negative. 2 strips in sequence ( had to call Peter he walked me thru it a 7 at night what a guy) I bought 5 spot wagos it came with a bunch of 3’s and had to double up so I purchased separate. There’s 7 strips per side of driver has 2 outputs. I used 18ga thermostat wire in stead of the single strand for cosmetic reasons. I used rubber utility cord because it’s being used with a light mover. Lots of flexing. Took me awhile to build first one ( I’m not real bright) but only a couple hours on the second one.
TerpyTyrone
LED Recruiter
Very good shit!
Cornfield Cultivator
Nutcase
Oh I added the piece of channel to have something to strap the wires to my first one not so neat. But I will redo it someday.
TerpyTyrone
LED Recruiter
@Peacehead
Check this thread out
I'm gonna make one for,him. 8 strips on a lrs350-24. He is trying to fill a 3 x 3.
I'm getting the 3500k spectrum so he can veg and flower no problem.
I'm thinking I may try this wiring method If its possible with a CV driver.
I think I could just put em all in parallel instead of running together like that.
Check this thread out
I'm gonna make one for,him. 8 strips on a lrs350-24. He is trying to fill a 3 x 3.
I'm getting the 3500k spectrum so he can veg and flower no problem.
I'm thinking I may try this wiring method If its possible with a CV driver.
I think I could just put em all in parallel instead of running together like that.
TerpyTyrone
LED Recruiter
Those 5 spot wagos are the way to go! I need some zip ties too.
If U think thats crazy wiring. U shoukd see my solder job on the first driver I ever boufht haha.
Opie1
Master Grower
How long does the LSR drivers usually last?
TerpyTyrone
LED Recruiter
These qb132s are going on a year solid. No issues, thermal runaway either.
The lrs is truly a power supply.
Meant for computers and the like. But a solid investment @ 1\2 the price.
I keep mine outside the tent because they arent waterproof and have open screws on the side.
I usually electrical tape right over it , once I make connections. I cut a hole for adjusting the V screw
Cornfield Cultivator
Nutcase
I tri
I tried to run them all in parallel but the last couple was very dim. Then I spoke to Peter and he said no more than 3 in a set.
TerpyTyrone
LED Recruiter
8 in parallel. No problems.
This is a CV driver @350 watts turned all the way doen for the pic.
I turn em up til they flash. Then back down a bit
NoWaistedSpace
PICK YOUR OWN
Do you have it on a light mover?
Cornfield Cultivator
Nutcase
Yes I do
Cornfield Cultivator
Nutcase
What I meant is you can’t do them end to end.